News

Laser cutting technology, as an efficient and precise material processing method, is widely used in fields such as metal processing, automotive manufacturing, aerospace, etc. With the continuous advancement of technology, the emergence of the 12000W laser cutting machine has significantly improved cutting efficiency and accuracy. Its high-power laser source can quickly cut thick heavy metal materials, but there is still much room for optimization in terms of cutting efficiency and accuracy.

Factors affecting cutting efficiency:

1. Laser power and focal position: Laser power directly affects cutting efficiency. The 12000W laser cutting machine can provide stronger cutting capability, thereby improving cutting speed. However, the accurate position of the laser focus is crucial for cutting efficiency. If the focus is too large and the heat affected zone of cutting is too wide, it is easy to cause roughness of the cutting surface; If the focus is too small, the cutting speed will slow down. Therefore, reasonable focus adjustment and optimization are the key to improving cutting efficiency.

2. Cutting speed: Cutting speed is an important factor affecting cutting efficiency. High speed cutting can usually improve production efficiency, but it requires balancing cutting quality to avoid burrs or other quality problems on the cutting surface caused by too fast cutting speed. The appropriate matching of cutting speed and laser power can improve cutting efficiency while ensuring cutting quality.

3. Gas assisted cutting: During laser cutting, auxiliary gases are often used to help remove the slag generated by cutting, provide additional heat, reduce the heat affected zone, and improve cutting quality. Different auxiliary gases have different effects on cutting efficiency. Choosing the appropriate auxiliary gas according to the material type and cutting requirements can optimize cutting efficiency.